氧化锆基纳米羟基磷灰石功能梯度材料的制备及(5)

开放获取声明：这是一篇开放获取文章，根据《知识共享许可协议》“署名-非商业性使用-相同方式共享4.0”条款，在合理引用的情况下，允许他人以非商业性目的基于原文内容编辑、调整和扩展，同时允许任何用户阅读、下载、拷贝、传递、打印、检索、超级链接该文献，并为之建立索引，用作软件的输入数据或其它任何合法用途。

[1]许力强,宋文植,孙宏晨.放电等离子烧结法制备牙科纳米氧化锆复相陶瓷力学性能研究[J].广东牙病防治,2014,22(8):440-412.

[2]赵露,吴音,郭兴国,等.浸渗掺杂技术制备彩色氧化锆陶瓷[J].稀有金属材料与工程,2018,47(S1):375-378.

[3]李敢,童昕,秦海燕,等.前牙区钛基台与氧化锆基台修复对种植体周围组织影响的短期评价[J].中国组织工程研究,2017,21(30):4811-4816.

[4]王玉增,单志华.羟基磷灰石(HAP)的制备及应用概况[J].皮革科学与工程,2015,25(6):34-38.

[5]CARVALHO O,SOUSA F,MADEIRA S,et zirconia surfaces via hybrid laser process for dental Laser ；106:157-167.

[6]鲍雨梅,徐哲玉,马龙,等.氧化锆增强HA涂层的制备及其磨损性能[J].中国陶瓷,2016,52(4):58-63.

[7]沈倩倩,潘育松.生物功能梯度材料的制备技术及性能评价[J].热加工工艺,2015,44(14):21-24.

[8]钱超,樊英姿,孙健.三维打印制备钛/羟基磷灰石复合体及功能梯度材料[J].中国组织工程研究,2013,17(29):5364-5370.

[9]EVANS C,TWEHEYO R,MCGARRY J,et al.What are the experiences of seeking,receiving and providing FGM-related of health professionals and women/girls who have undergone FGM:protocol for a systematic review of qualitative ；7(1):018-170.

[10]BAYATI R,MOLAEI R,RICHMOND A,et of properties of yttria stabilized zirconia ep itaxial thin films by excimer laser Appl Mater ；6(24):-.

[11]TOMAN M,TOKSAVUL S,SARIKANAT M,et resistance of endodontically treated teeth:effect of tooth coloured post material and surface J Prosthodont Restor ；18(1):23-30.

[12]DANILENKO I,LASKO G,BRYKHANOVA I,et al.The Peculiarities of Structure Formation and Properties of Zirconia-Based Nanocomposites with Addition of Al 2 O 3 and Res ；12(1):125-130.

[13]MIAO Y,YANG Z,LIANG B,et al.A novel in situ synthesis of SiBCN-Zr composites prepared by a sol-gel process and spark plasma T.2016；45(32):-.

[14]WANG T,TSOI JK.A novel zirconia fibre-reinforced resin composite for dental use.J Mech Behav Biomed ；53(5):151-160.

[15]LI X,YOSHIHARA K,DE MUNCK J,et tricalcium silicate cement formulations with added zirconium Oral ；21(1):895-905.

[16]SPONCHIA G,MOSHTAGHIOUN BM,RIELLO P,et compressive creep of novel fine-grained orthorhombic ZrO2 ceramics stabilized with 12 mol% Ta doping.J Eur Ceram Soc.2018；38(5):2445-2448.

[17]ZHOU C,DENG C,CHEN X,et and biological properties of the micro-/nano-grain functionally graded hydroxyapatite bioceramics for bone tissue Mech Behav Biomed ；48(1):1-11.

[18]SANDOMIERSKI M,STRZEMIECKA B,CHEHIMI Diazonium-Modified Silica Fillers for ；32(44):-.

[19]EWAIS EM,AMIN AM,AHMED YM,et effect of magnesia and zirconia on the bioactivity of calcium silicate ceramics at C\S ratio less than Sci Eng ；70(2):155-160.

[20]李清禄,李世荣.非保守功能梯度材料简支梁在过屈曲附近的振动响应[J].应用基础与工程科学学报,2019,27(1):95-103.

[21]MAHMOUDI M,SAIDI AR,HASHEMIPOUR MA.The use of functionally graded dental crowns to improve biocompatibility:a finite element Methods Biomech Biomed ；21(1):161-168.

[22]李清禄,朱作权.陶瓷氧化锆和金属钛合金FGM变截面立柱的过屈曲数值模拟[J].功能材料,2017,48(2):2226-2230.

[23]BYKOV YV,EGOROV SV,EREMEEV AG,et profile optimization for microwave sintering of bulk Ni-Al2O3 functionally graded Mater Proc ；214(2):210-216.

[24]BOLELLI G,BELLUCCI D,CANNILLO V,et between suspension plasma sprayed and high velocity suspension flame sprayed bioactive Coat ；280(1):232-249.

[25]LIN D,LI Q,LI W,et al.Bone remodeling induced by dental implants of functionally graded Biomed Mater Res B.2010；92(2):430-438.

[26]RAZA MR,SULONG AB,MUHAMAD N,et of binder system and processing parameters on formability of porous Ti/HA composite through powder injection ；87(2):386-392.

[27]YOSHIHIKO H,KOUSUKE Z,HIDETOSHI F,et and Compression Properties of Functionally Graded Copper Foam Made Using Friction Powder Sintering and Mater Eng and ；26(9).4508-4513.

[28]BAI D,LIU H,BAI H,et metallurgy inspired low-temperature fabrication of high-performance stereocomplexed polylactide products with good optical ；6(5):202-220.

[29]万千.HA/316L不锈钢生物功能梯度材料的理化性能及体外生物活性研究[D].长沙:中南大学,2006.

[30]FERREIRA SC,CONDE A,ARENAS MA,et Mechanism on SiC Nanoparticle Matrix Composites Produced by Power ；7(12):8151-8167.

文章来源：《烧结球团》 网址: http://www.sjqtzz.cn/qikandaodu/2021/0321/437.html